×

H3C 交换机配置 Not ready for automatic configuration: no interface available. Waiting for the next...

hqy hqy 发表于2025-03-13 21:10:01 浏览359 评论0

抢沙发发表评论

交换机  型号NS252 开机一直出现这个界面  请大侠帮忙处理下 

开机按CTRL+B  也一直没有反应 直接进系统

Automatic configuration attempt: 16.
Not ready for automatic configuration: no interface available.
Waiting for the next...

Automatic configuration attempt: 17.
Not ready for automatic configuration: no interface available.
Waiting for the next...

Automatic configuration attempt: 18.
Not ready for automatic configuration: no interface available.
Waiting for the next...

Automatic configuration attempt: 19.
Not ready for automatic configuration: no interface available



进入自动配置了,按ctrl+C或者ctrl+D看看能不能调过这步登录设备,如果不能,断开连接,设置超级终端软件的连接属性,取消流控,然后再连接,以CRT软件设置为例:

自动化配置有误,现场把启动的自动化配置去了试一下

ctrl+C或者ctrl+D试试。

换个终端或者console线试试吧,还不行就在bootrom界面导入一份配置文件进行。






推荐本站淘宝优惠价购买喜欢的宝贝:

image.png

本文链接:https://www.jinbel.cn/post/9577.html 非本站原创文章欢迎转载,原创文章需保留本站地址!

分享到:
打赏

群贤毕至

访客

您的IP地址是: